> > Cut some rock away, check it with the straight
> > edge and square, then cut again.
> How do you determine if the 150' channel is
> straight to within 1/50"?
With a straight edge and square. Checking the work as it goes along. Not hard to do really. Didn't I just say that?
Won't work. Jon has tried to explain why it won't. Evidently you are not comprehending.
"Conformity" and "consistent" are
> irrelevant terms in this type of construction.
I would hope not! These pyramids are marvels of construction, and as such, inherently require conformity and consistency in order to be that way. So, on the one hand, you are all over the perfection of leveling required, then pull a 180 saying consistency is irrelevant. How odd.
Construction terminology honey. If you don't understand the concepts the terminology represents, you can't understand the construction.
A 150' foot string
> pulled completely taut with no slack whatsoever?
I didn't say string. You say string.
You don't say anything. You just pretend to have all the answers.
What does 'smooth' have to do with the angle and accuracy? This isn't about texture, not yet anyway.Quote
And by the way, Audrey, the DP is not laser bladed smooth. There are pictures of it on the internet in case you'd like to investigate further.
Pictures on the internet, you don't say!
Stick around a while, you've much to learn from the guys here.