To quickly arrive at facts of this object is my goal.
To start, I think :) What I propose is my thought. All my observations are made through the pictures I see.
I will post a few pictures, and hopefully this will explain what is in my mind.
As a propulsion/antigravity device
As a second, I propose that the disk was created, by spinning it. Look at the outer edge of the device. The outer "ring" Now imagine a semi liquid spinning at high speeds, the liquid being the device we now see. As it was spun it would naturally all go to the outer edge. NOW, look at the fin's that reach back to the center, they are being pulled, three of them to the center, also up and away from it's center mass.
It would be like creating a force, by whatever means, the Force is the goal. But to create the object that will eventually create the same force, you must first create the force, then by introducing this material to the process we have an "object" that will when used, create this same force.
I believe that this is used to create a force that overcomes gravity, as you can see very plainly in the creation of the fins, look carefully.
So in retrospect, a force that was able to overcome gravity was needed to make the device.
Now the makeup of the device is thus. Liquid Ether, spin, vibration.
The disk is still very much alive.
If used appropriately, in addition to other ship systems, this could be used to create an anti gravity field in an airborne ship.
Another observation, the disk's center mass is the same as it's overall mass, so if you were to measure the weight of everything that is "center" of the tip of the fins. Say, cut that out, and then weigh the rest, these would be proportionate.
Edited 2 time(s). Last edit at 11-Jul-19 17:03 by moteinsun.