Mysteries :
The Official GrahamHancock.com forums

For serious discussion of the controversies, approaches and enigmas surrounding the origins and development of the human species and of human civilization. (NB: for more ‘out there’ posts we point you in the direction of the ‘Paranormal & Supernatural’ Message Board).

Hi Jacob

It is not possible to write real pi in unit fractions because it is irrational. However using the canon of Ancient measure as a Pi calculation device unit fractions can be used to home in on real Pi by approaching it from above and below and producing a workable approximation close enough to be used at Stonehenge and the GP as Dune has demonstrated many times.

The value is 3.1416 and it is greater than real Pi and this is how it works using the canon.

22/7 can be restated as 132000000/42000000

132000000 is 25000 miles so take 10 miles off this to give 24990/25000 x 22/7 = 3.1416. It is that simple.

52800 feet has been taken off 132000000.

The second step to produce a fractional version less then real pi is as follows.

Treat 52800 as the 99th step so the 100th will be 53333.3333r and repeat the process

25000 - 10.01010101010101r = 24989.89898989898/25000 x 22/7 = 3.141587302 and this number can be produced fractionally.

Add the two together and divide by 2 to get 3.141593651 real pi being 3.141592654 too close to call.

The builders obviously settled for 3.1416 as one usable version and the evidence for this is Thom's 330 megalithic yard Aubrey circle. 330 x 2.72 = 897.60 multiply this by 3.5 to get 3141.6 not my numbers being used here.

Did the Egyptians know 5.333r possibly it is the Nippur cubit x Egyptian Pi.

real Pi lies somewhere betweem iteration 99 and iteration 100. At Stonehenge 3.1416 is base 100.

It really is not difficult once the method for the manipulation of pi is understood. All calculations of Pi can be made fractionally, they have to be.

I did think root 2 was irrational but now I am not sure because (real root 2 x 2.22222r) squared is exactly 9.87654320987654320987654320 ad infinitum and this repeating series is always fractionable.

In terms of the cubit I think I am up to speed now and root 2 imperial can show how 28 is built into the system.

root 2 imperial is 99/70 and this represents 2.7 units being 1.414285714 as a fraction and 2.8 units is 1.46666r 1/10 of the eclipse unit. 28 units is 14.666r the eclipse unit. So every cubit rod can represent 14.666r but you will never see it because it is hidden. The system is secret.

The cubit at the GP can be found by dividing the perimeter in inches by 1760 for example 363000 / 1760 = 20.625

. It doesn't matter how long it is it still represents 28 and 14.666r.

the cubit x 1.584 is the variable megalithic yard so 20.625 x 1.584 = 32.67.

the cubit x 1.9008 is the variable metre for example 20.83333r x 1.9008 = 39.6

These fixed relationships between the units have only very recently been uncovered and they really change everything.

the next example will be using the megalithic yard and the thing is no one knew about it until Thom discovered it and no one knew it was designed into the GP till Hugh wrote about it. The variable megalithic yard is fixed within the GP base whatever height is chosen.

base / 13333.3333r = the variable megalithic yard

36266.666r / 13333.333r = 2.72.

36666.666 / 13333.333r = 2.75 this is Jim's and Manu's unit.

Just because you haven't seen it does not mean we are getting it wrong. No one saw the megalithic yard coming and academia went into a tailspin.

The metre produces a cubit of 39.37 / 1.9008 = 20.71233165 x 1760 = 36453.7037 / 100 = 364.537037 x 360 x 1000 = 131233333.3 and this is 24854.79798 miles or 40000000 metres of the modern variety,

There are many different cubit rods in various museums and they have all been well recorded.

The Nippur cubit was measured by John Neal as 1.6875 imperial feet 20.25 inches x 1760 = 35640 inches.

I don't think you have come across this stuff before so your comments would be appreciated.

It is not possible to write real pi in unit fractions because it is irrational. However using the canon of Ancient measure as a Pi calculation device unit fractions can be used to home in on real Pi by approaching it from above and below and producing a workable approximation close enough to be used at Stonehenge and the GP as Dune has demonstrated many times.

The value is 3.1416 and it is greater than real Pi and this is how it works using the canon.

22/7 can be restated as 132000000/42000000

132000000 is 25000 miles so take 10 miles off this to give 24990/25000 x 22/7 = 3.1416. It is that simple.

52800 feet has been taken off 132000000.

The second step to produce a fractional version less then real pi is as follows.

Treat 52800 as the 99th step so the 100th will be 53333.3333r and repeat the process

25000 - 10.01010101010101r = 24989.89898989898/25000 x 22/7 = 3.141587302 and this number can be produced fractionally.

Add the two together and divide by 2 to get 3.141593651 real pi being 3.141592654 too close to call.

The builders obviously settled for 3.1416 as one usable version and the evidence for this is Thom's 330 megalithic yard Aubrey circle. 330 x 2.72 = 897.60 multiply this by 3.5 to get 3141.6 not my numbers being used here.

Did the Egyptians know 5.333r possibly it is the Nippur cubit x Egyptian Pi.

real Pi lies somewhere betweem iteration 99 and iteration 100. At Stonehenge 3.1416 is base 100.

It really is not difficult once the method for the manipulation of pi is understood. All calculations of Pi can be made fractionally, they have to be.

I did think root 2 was irrational but now I am not sure because (real root 2 x 2.22222r) squared is exactly 9.87654320987654320987654320 ad infinitum and this repeating series is always fractionable.

In terms of the cubit I think I am up to speed now and root 2 imperial can show how 28 is built into the system.

root 2 imperial is 99/70 and this represents 2.7 units being 1.414285714 as a fraction and 2.8 units is 1.46666r 1/10 of the eclipse unit. 28 units is 14.666r the eclipse unit. So every cubit rod can represent 14.666r but you will never see it because it is hidden. The system is secret.

The cubit at the GP can be found by dividing the perimeter in inches by 1760 for example 363000 / 1760 = 20.625

. It doesn't matter how long it is it still represents 28 and 14.666r.

the cubit x 1.584 is the variable megalithic yard so 20.625 x 1.584 = 32.67.

the cubit x 1.9008 is the variable metre for example 20.83333r x 1.9008 = 39.6

These fixed relationships between the units have only very recently been uncovered and they really change everything.

the next example will be using the megalithic yard and the thing is no one knew about it until Thom discovered it and no one knew it was designed into the GP till Hugh wrote about it. The variable megalithic yard is fixed within the GP base whatever height is chosen.

base / 13333.3333r = the variable megalithic yard

36266.666r / 13333.333r = 2.72.

36666.666 / 13333.333r = 2.75 this is Jim's and Manu's unit.

Just because you haven't seen it does not mean we are getting it wrong. No one saw the megalithic yard coming and academia went into a tailspin.

The metre produces a cubit of 39.37 / 1.9008 = 20.71233165 x 1760 = 36453.7037 / 100 = 364.537037 x 360 x 1000 = 131233333.3 and this is 24854.79798 miles or 40000000 metres of the modern variety,

There are many different cubit rods in various museums and they have all been well recorded.

The Nippur cubit was measured by John Neal as 1.6875 imperial feet 20.25 inches x 1760 = 35640 inches.

I don't think you have come across this stuff before so your comments would be appreciated.

Sorry, only registered users may post in this forum.